

Key of Success is Always Improve
We offer you various packages of Automation training which can improve your skill in PLC and Automation field.
Scroll Down
Basic PLC Programming Siemens S7-300 (Simatic Manager V5.6) Rp. 3.500.000 | 4x8 Jam
Advanced Programming PLC Siemens S7-300+Simatic Manager / Step 7 V5.6 Rp. 4.000.000 | 4x8 Jam
HMI Design (WinCC Flexible CSA Software Rp. 3.500.000 | 3x8 Jam
Festo MPS Distributing, Conveyor, Sorting using Siemens PLC Rp. 4.000.000 | 4x8 Jam
Basic Programming PLC Siemens S7-300/S7-1200 (TIA PORTAL v15.1 Software) Rp. 3.500.000 | 4x8 Jam
Advanced PLC Programming Siemens S7-300 / S7-1200 using TIA PORTAL V15.1 Software Rp. 4.000.000 | 4x8 Jam
HMI Design using WinCC Advanced TIA PORTAL v15.1 Software Rp. 3.500.000 | 3x8 Jam
MPS Process Fluid Automation System using Siemens PLC S7-300 / S7-1200 Rp. 3.500.000 | 4x8 Jam
Basic Design and Programming using Automation Studio Software Rp. 3.500.000 | 3x8 Jam
Advance Design and Programming using Automation Studio Software Rp. 4.000.000 | 4x8 Jam
Programming and Configuration using WinCC SCADA v7.5 Software Rp. 5.000.000 | 4x8 Jam
Basic Pneumatic System (using FluidSim Software) Rp. 3.500.000 | 3x8 Jam
OPC (OLE for Process Control) KEPServerX, Matrikon and Cogent DataHub Rp. 4.000.000 | 4x8 Jam
PLC Siemens Communication (Profibus, Profinet) Rp. 4.000.000 | 4x8 Jam
Basic Electropneumatic System (FluidSim Software+Festo Trainer) Rp. 3.500.000 | 4x8 Jam
PID Control on PLC Siemens S7-300/S7-1200 Rp. 3.500.000 | 3x8 Jam
Fuzzy Control on PLC Siemens S7-300/S7-1200 Rp. 3.500.000 | 3x8 Jam
Mini SCADA System using Festo Plant Rp. 4.000.000 | 4x8 Jam
Basic Programming and Interface of Siemens IoT2040 (Arduino IDE) Rp. 2.500.000 | 3x8 Jam
Advanced Programming Siemens IoT2040 (Arduino IDE) Rp. 3.000.000 | 3x8 Jam
Variety of PLC Communication Protocol (Modbus, HostLink/ FINS, RS Instruction, HART) Rp. 4.000.000 | 4x8 Jam
5 Application S7-1200 and IoT2040 HMI, Datalog using SMS, WebServer and IoT Rp. 4.000.000 | 4x8 Jam